Genaral specification
Engine power: 300HP@/2200 RPM Mixing Capability: 80 BBL Density range: 1.3-2.5g/cm3 Auto control precision: +/-0.02 g/cm3 Surge tank: 8BBL/1.2m3 Configuration Engine: caterpillar C7 300HP@2200RPM Hydraulic system: Eaton heavy close hydraulic system centifugal pump: 5X6
Features
Continuous/batch mixing; Utilizes new high energy mixing technology. •Equipped with anti-impact and lifting frame, for easy transporting. •High efficiency and water-saving tank cleaning system.
Advantages over old jet systems
– More accurate control of cement slurry
– More energy added by RA 56
– Gives a second chance to control density
– Can stop pumping downhole and mixing, leaving recirculating
Low pressure mixing system
– Recirculating line from a tub goes back to mixing bowl
– Knife gate to control cement falling into mixing bowl
– 2 bypasses with jets
Configuration
Engine: caterpillar C7 300HP@2200RPM
Gear box: Funk 59000 series
Hydraulic system: Eaton heavy close hydraulic system
Slurry recirculating pump: Serva RA56
Booster/transfer pump: Serva RA56 Mixing
water pump: Serva 4X3
Mixing system: high energy system
Control system: ACM-III.1 auto density control system
Genaral specification
– Engine power: 300HP@/2200 RPM
– Mixing Capability: 0.3-2.3m3/min
– Density range: 1.3-2.5g/cm3
– Auto control precision: +/-0.02 g/cm3
– Batch mixing tank volume: 2x50BBL/2x8m3
– Mixing tank volume: 8BBL/1.2m3
– Working ambient temperature: -20°C~+50°C
– Overall dimension: 7850 (L) x 2500(W) x 3150mm(H)
– Net weight: 11500kg
Features
– Fluff transfer tank prior to discharge by opening vent and air line to the pads.
– Close vent to pressurize the transfer tank.
– Open vent and fill on receiving tank.
– Pass air through this tank to check for plugging.
– Open discharge valve on transfer tank.
– Air pressure will drop when all bulk transferred.
– Close transfer discharge valve and bleed pressure off.
– Close vent and fill on receiving tank.
– Air compressor
– Wilden pump .
– Centrifugal pump skid
– Lighting Towers
– Fire pumps.
